动态网络安全的框架模型

针对现有的静态网络安全模型存在的问题,提出了一种动态网络安全框架模型。该安全模型利用各种安全组件构建了立体的五层防御体系,并实现了防御能力的动态升级。     

焊接工艺对熔敷金属韧性的影响

探讨了改变焊接工艺对焊条熔敷金属冲击韧性的影响．研究表明：改变焊接工艺,将通过改变熔敷金属的化学成分,影响熔敷金属的强度和韧性;降低焊接线能量时,将降低熔敷金属中的氧含量及其氧化夹杂物的数量和大小,从而提高熔敷金属的韧性     

舰船可靠性对维修费用的影响分析

对两类主要影响因素分别建立了相应的数学模型．依据约化理论,建立了维修费用的ＶＡＲ模型．同时,根据统计资料分析了实际舰载主要设备的故障规律,指出了传统定时维修方式的理论基础的不完整性．     

紧固件拆装时间预计模型

紧固件拆装作业时间是影响机械产品维修性的主要因素之一,占机械产品维修作业时间的70％～80％。因此,探讨紧固件拆装作业时间的预计方法,对研究、设计机械产品的维修性,将是十分必要的。通过分析紧固件拆装作业过程,探索出了影响拆装作业时间的诸因素,并对所有的影响因素进行分析、权衡和回归,建立紧固件拆装作业时间的预计模型。将此模型在某型履带式车辆上进行了实际验证,证明了模型的正确性及通用性。     

基于最大熵谱估计验证战术导弹的气动模型

现代谱估计方法是验证系统仿真模型的有效方法。战术导弹飞行试验的遥、外测数据记录了大量的过程参数,可以利用这些参数进行气动力和气动力矩的计算,与飞行试验过程参数进行分析比较。应用最大熵谱估计检验导弹的气动力和气动力矩模型的可信性,可以给出定量的结果。文章给出的方法可以作为战术导弹气动参数模型研究的一种辅助手段。     

面向GPU的非结构网格有限体积计算流体力学的图染色方法优化

采用图染色方法解决通量累加和局部最大压力计算引起的两种典型资源竞争问题,并通过共享内存的使用、体编号和面编号的重排、面数据的重排三种策略优化图染色方法。针对应用在空气动力学多种规模的三维网格,分别采用双精度和单精度操作数,在Nvidia Tesla V100和K80 GPU上,展开性能测试。结果表明:共享内存的优化效果不明显;体编号和面编号重排降低了图染色方法的计算性能;面数据重排可以有效地优化图染色方法;计算性能在V100上提高20%左右,在K80上提高15%左右。     

基于LPS模型的飞行器控制系统故障诊断方法

传统故障诊断方法一般针对测量信号而展开,未考虑其实际物理连接特性对故障诊断结果的显著影响。随着专业电气系统设计软件的广泛应用,设计人员容易获取系统的物理连接特性和逻辑连接特性。论文通过对产品层、系统层的信号、物理连接及其互连关系的分析,提出了一种将抽象的逻辑信号和具体的物理连线统一起来的逻辑物理综合(LPS)模型,并研究了基于导线表文件和网表文件的LPS模型实例化方法,开发了一套智能故障检测软件,进行了算例验证,结果表明：基于LPS模型的故障诊断方法能够将系统故障定位到指定产品级别上,具有极大的工程应用价值。     

Performance analysis of queue length monitoring of M/G/1 systems

This study investigates the statistical process control application for monitoring queue length data in M/G/1 systems. Specifically, we studied the average run length (ARL) characteristics of two different control charts for detecting changes in system utilization. First, the nL chart monitors the sums of successive queue length samples by subgrouping individual observations with sample size n. Next is the individual chart with a warning zone whose control scheme is specified by two pairs of parameters, (upper control limit, d_u) and (lower control limit, d_l), as proposed by Bhat and Rao (Oper Res 20 (1972) 955–966). We will present approaches to calculate ARL for the two types of control charts using the Markov chain formulation and also investigate the effects of parameters of the control charts to provide useful design guidelines for better performance. Extensive numerical results are included for illustration. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

材料色散对全固态带隙光纤带内色散的影响

全固态光子带隙光纤已开始用于产生超连续谱,其带隙效应可以控制超连续谱的范围,但是带内的色散特性对于超连续谱的产生有着重要的影响.采用平面波法计算了同一带隙光纤不同阶带隙内的色散曲线和不同带隙光纤同阶带隙内的色散曲线,零色散波长在带内相对位置与带隙位置密切相关,在长波长区域,零色散点位于带隙的短波边;在短波区域,零色散点...     

Periodic review inventory management with contingent use of two freight modes with fixed costs

We study a stochastic inventory model of a firm that periodically orders a product from a make‐to‐order manufacturer. Orders can be shipped by a combination of two freight modes that differ in lead‐times and costs, although orders are not allowed to cross. Placing an order as well as each use of each freight mode has a fixed and a quantity proportional cost. The decision of how to allocate units between the two freight modes utilizes information about demand during the completion of manufacturing. We derive the optimal freight mode allocation policy, and show that the optimal policy for placing orders is not an (s,S) policy in general. We provide tight bounds for the optimal policy that can be calculated by solving single period problems. Our analysis enables insights into the structure of the optimal policy specifying the conditions under which it simplifies to an (s,S) policy. We characterize the best (s,S) policy for our model, and through extensive numerical investigation show that its performance is comparable with the optimal policy in most cases. Our numerical study also sheds light on the benefits of the dual freight model over the single freight models. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011